Europe to get PROPER Windows 7

Windows7_v_print

Microsoft announced yesterday that Europe would get the “proper” version of Windows 7 and not the horribly reduced E version as previously stated!

For those of you who haven’t been following this, the E version of Windows 7, just for Europe, would not have contained Internet Explorer, because apparently the 7 or so users of a browser called Opera wouldn’t be happy. Opera complained to the European Commission about Microsoft. I didn’t see them complaining to them about Apple with their Safari browser though, but that’s another story!

This also means that existing users of Windows Vista in Europe will be able to upgrade to Windows 7, where as with the E version there was no upgrade path and Vista owners would need to do a clean installation.

Anyone who has pre-ordered the Windows 7 E version will get the PROPER version instead 🙂

Review of the WD Caviar Green 2TB SATA Hard Drive

You could easily argue that a hard drive is the most important component of your computer or storage device, and personally I agree with that. After all, it is the hard drive that stores all of your important data and serves it up to you when you ask for it.

Hard drives come in all shapes and sizes, and recently Western Digital released the worlds first 2TB SATA drive, the Caviar Green 2TB drive, WD20EADS.

wdfCaviarGreen_SATA32 WD 2TB Green Drive

Well I certainly couldn’t pass up the opportunity to play around with one of these drives. The drive itself consists of 4 separate 500GB platters – seriously, how do they manage to fit them into the same size that only a year or so ago was 1TB!

The “Green” element of the drive refers to the fact that it has a reduced power consumption of up to 40% compared to standard desktop drives but rather than reel off a lot of features, I will just paste them below from the product description.

Product Features

Reduced power consumption — WD has reduced power consumption by up to 40 percent
compared to standard desktop drives with the combination of WD’s IntelliSeek™, NoTouch™,
and IntelliPower™ technologies.

Helps enable eco-friendly PCs — By using environmentally-conscious PCs with our
WD Caviar Green drives on board, large organizations with many desktop computers can
minimize their carbon footprint and save real money on electricity costs.

Cool and quiet — GreenPower™ technology yields lower operating temperatures for
increased reliability and low acoustics for ultra-quiet PCs and external drives.
Perfect for external drives — External drive manufacturers can eliminate the need for a fan in
a high-capacity product with a WD Caviar Green drive, the coolest and quietest in its class.
IntelliPower™ — A fine-tuned balance of spin speed, transfer rate, and caching algorithms
designed to deliver both significant power savings and solid performance. Additionally,
WD Caviar Green drives consume less current during startup allowing lower peak loads on
systems as they are booted.

IntelliSeek™ — Calculates optimum seek speeds to lower power consumption, noise, and
vibration.

NoTouch™ ramp load technology — The recording head never touches the disk media
ensuring significantly less wear to the recording head and media as well as better drive
protection in transit.

StableTrac™ — The motor shaft is secured at both ends to reduce system-induced vibration
and stabilize platters for accurate tracking during read and write operations. (2 TB model only)
Native Command Queuing (NCQ) — Server feature for performance in random I/O
transaction environments. It aggregates many small random data transfers and allows the disk
to reorder the commands in a sequential order for faster access.

Perpendicular Magnetic Recording (PMR) — Employs PMR technology to achieve even
greater areal density.

Low power spin-up — WD Caviar Green drives consume less current during startup allowing
lower peak loads.

Advanced power technology — Electronic components deliver best-in-class low power
consumption for reduced power requirements and increased reliability.

Performance Specifications
For those of you who might be interested in specifications of the drive, they are as follows:

Transfer Rates
Buffer To Host (Serial ATA)  : 3 Gb/s (Max)

Physical Specifications
Formatted Capacity  : 2,000,398 MB
Capacity  : 2 TB

Interface  : SATA 3 Gb/swdfCaviarGreen_SATA32-2

User Sectors Per Drive  : 3,907,029,168

Physical Dimensions
Height : 1.028 Inches
Length  : 5.787 Inches
Width  : 4.00 Inches
Weight  : 1.61 Pounds

Environmental Specifications

Shock
Operating Shock (Read)  : 65G, 2 ms
Non-operating Shock  : 300G, 2 ms

Acoustics
Idle Mode  : 25 dBA (average)
Seek Mode 0  : 29 dBA (average)
Seek Mode 3  : 26 dBA (average)

Vibration
Operating
Linear  : 20-300 Hz, .75G (0 to peak)
Random  : 10-300 Hz, 0.008 g² / Hz

Non-operating
Low Frequency  : 5-20 Hz, 0.195 inches (double amplitude)
High Frequency : 20-500 Hz, 4.0G (0 to peak)

Electrical Specifications

Current Requirements

Power Dissipation

Read/Write  : 6.00 Watts
Idle  : 3.7 Watts

Standby  : 0.80 Watts

Sleep : 0.80 Watts

Thoughts and Conclusions

My first thing when playing with this drive was to put it into my Windows Home Server and use it as part of the storage pool. The size of the drive is great for increasing my available space, and the fact that it uses a lot less power and produces a lot less heat than most other drives would be perfect. But then I decided that it might be even better to use it as the primary drive on my main desktop machine, so that is exactly where I put it, and where it is right now.

It has been running now for a few weeks and I haven’t had a single problem with it. In fact, it really is so quiet that you barely know its there! The speed of the drive is great as well – ok, it is not the fastest hard drive on the planet, but it also doesn’t claim to be. Now don’t get me wrong, it isn’t slow either! In fact, I would be hard pressed to find anything bad to say about the drive (except maybe the price, and even then it wouldn’t be a complaint as much as a quiet grumble).

I can highly recommend this drive to anyone who wants to increase their storage capacity, or even someone who just wants to use a more “eco” friendly drive.

Sorry Western Digital, you are not getting this little beauty back. Any chance of a few more – for research purposes of course 🙂

The WD Caviar Green 2TB SATA Drive retails in the UK for around £180 (including from Amazon)   and around $299.99 in US. Whilst it certainly isn’t cheap, it really isn’t that expensive really considering what you are getting for the price. And like a lot of technology, this is the only “one” on the market right now so expect the price to drop eventually.

A Little Review of USB Installs

So everyone has heard that with the upcoming Windows 7 you can install via a USB stick. Well it is not just that one operating system; Win XP, Vista and Windows Home Server can also be done this way. Sure others can also be installed using this method but I have not tested it.

So how hard is it? Not hard at all. There are many links on the internet if did a search but a handy little tool has come to light. It is called “A Bootable USB”.

It is best that you use a USB that is 4 GB or greater but on some of the OS installs you can use smaller ones. Be aware that some USB sticks that I have tried have just not worked.

This utility is so easy to use; The Utility, a USB stick and the DVD or ISO image of the OS. The utility can create a bootable in a few minutes. You simply specify your source (DVD or ISO) and click “Start” (“Start DVD” or “Start ISO”). Upon completion, you’ll have a bootable USB drive which you use to install your new OS.

clip_image002

Download A Bootable USB.

How I bought Windows Home Server on a Friday night.

Each Friday night I write an article about some aspect of Windows Home Server. I write about Add-Ins, hardware, software, tips and even reasons to use Windows Home Server. Friday when I got home I decided I was just going to enjoy Windows Home Server and give it the night off. Well you know what I mean.

Screen

Equipment Needed

Windows Home Server

Two Beers (optional as always)

Memories and some screen shots of old email

Background

Three years ago I had a relatives (uh mom) laptop hard drive crash. The drive was unrecoverable and the backup drive I had lent them still to this day has not been found. After three days of reinstalling software, locating files from other computers and replacing the drive I decided then that I would never let this happen again.

I immediately looked around for solutions and found the Netgear SC101 SAN. Yes SAN. The SC101 was a great little toaster looking thing that allowed you to use your own 3.5″ IDEs over a network. I added two IDE 500GB drives and proudly owned my first TB. Well slightly less. Anyway. The network access allowed me to use Windows Backup Wizard to back the PCs up to one location and solved the issue of total data loss. In addition the Backup Wizard required the recipient PC to already have Windows loaded so if I did have a drive loss I was still spending hours to restore. The network speed was slow and backups were also slow.The SC101 connector software (ZSAN) was crap, it did not have any cooling (later models did) and eventually I had to look elsewhere.

The next year I finally gave up on the Netgear SC101 (I had three total) and the connector issues and moved to Buffalo LinkStation NAS drive. This drive solved my connectivity issues and it was over twice as fast. It was still slow during backups but it worked. It had a noisy little fan but ran cool and the software was ok.

Mental note: I bought my sister one too and it died two weeks ago after two years of service. It is being replaced with an LX195 next weekend. I got the HP for $199 last week. Did anyone else see that amazing deal? It is listed below.

Never happy with the Buffalo the next year I upgraded to the Western Digital My Book World Edition. It was pretty, white, had a strange blue ring, 500 GB and I could access the drive from the Internet. It seemed like a great solution, but while it had speeds that were triple the Buffalo, the software was annoying and required you to register to access the drive. It ran really hot and was a disappointment overall since it required the Mionet software and blocked the sharing of certain files types. Flippers.

NAS Speeds

I have referenced this site in other articles. It is a great site for speed comparisons and network information including all HP WHS systems!

http://www.smallnetbuilder.com/component/option,com_nas/Itemid,190

Are you going to talk about Windows Home Server in this article or just bash NAS?

At the start of last year (2008), frustrated and pissed off at NAS, I got a licensed copy of Windows Server 2003 and decided to make my own server. I had an old Optiplex GX60 and loaded the 2003 Server OS. With 2003 I could access files and log in remotely. I created folders and could connect all of my machines. In addition my speed seemed to be improved and the interface was through Windows so there were not compatibility issues. It looked promising but it sure was complicated. And was it safe? I still do not know if I had it set up right. Now I was starting to see terms like domain, trees and clustering. WTF? I am not a SysAd. I even bought a book but it seemed like I was going to have to get a degree in Server 2003 just to make sure it was safe and running properly.

Once again frustrated, I was thinking of selling the software and licenses. I looked on Newegg to see what the Server 2003 software was going for new and as I queried Windows Server Software and I stumbled upon Windows Home Server. What was this software? I had never heard of it. $99 with free shipping? I bought it right then and there. Oh, and then I went to Microsoft to see what I bought. At that time the MS WHS web site was different. You could either buy the HP version (expensive and through a link) or you could build your own. Since I am a Dell guy I logged on to Dell and found a closeout on a PowerEdge SC440 with no OS. I was on my way to Servertown!

Dell

I got the Dell in a few days, and after running to BB to get a IDE DVD (in my rush to order the Dell I just got the CD-ROM and did not think about WHS DVD installation) and booted from the DVD. Within the first few hours I am up and running and in LOVE. This interface is so great and easy to work in. The backup alone is worth the cost of the whole system. I have spent the last six months flipping around with Server 2003 so this was amazing. I also realized I need more storage so I went to Frys and got a 500GB drive to sit next to the 80GB.

For those of you doing the math we have:

$246.81 for the Dell

$108.24 for the OEM WHS

$86.59 for the 500GB drive

$39.18 for the DVD drive from BB

GRAND TOTAL of $480.82

Two days later I see a deal for the HP and get one for my parents for $80 less. Remember this deal? Did I mention I was in love?

HP

Oh, and I got $92.50 back from Microsoft!

CB

Home-built versus HP

I must say that my home built is still going strong but I would definitely recommend a HP to anyone looking for simplicity and ease of use. I had some driver issues with the Dell since it did not come with an OS. In addition, the cost savings for HPs make it just as competitive as making your own. If you like hardware, build your own but otherwise look for a supported WHS.

Preaching to the Choir

We all love WHS. You would not have read this far if you did not. Anyone can get these types of WHS deals. I am just a normal guy with no special contacts. I just keep an eye on Fat Wallet and Tech Bargains and buy the deals when they hit. I am sure you all have similar deals that you received. If any of you have not bought a WHS yet look around first and get the best deal you can. If you shop smart you can get a WHS for not much more than a NAS drive.

For example:

HP had a sale going on last week (still active as of July 25th, 2009) and instead of buying another Buffalo NAS for my sister (hers flippin died) at Newegg for $200, how could I resist a WHS for the same price? Are they just giving this stuff away or what?

Techbargains has the detailed information and the deal is legitimate. I got it on Saturday and will hook it up at her house in two weeks!

LX195

I bet you can even get better deals than I did! Tell your friends and family. I think about all of the money I spent on the NAS systems over the years and I could have bought multiple WHS systems.

It only takes one disk crash to change your life. You have to back up. Could Microsoft make it any easier for us? I cannot wait to see what future updates bring us.

Conclusion

This turned into an article about how WHS can be an alternative to NAS and about good deals for WHS systems. It was not my intention to write the article like this but I think I wrote from the heart. If anything I hope it was entertaining or informative. While I wrote this article, my WHS was watering my lawn, turning on lights, playing a movie on my plasma and keeping my data organized. Tonight when I go to sleep it will back up my files and ensure that each PC on my network is safe and secure.

NAS has its place in history but WHS is the future. I love Windows Home Server. Viva WHS. Seriously.

See you next Friday night,

Timothy Daleo

Review of HDHomeRun Networked Digital TV Tuner

TV Tuner cards are not exactly new – you can buy cards for you desktop computer and you can even buy USB devices as well. What is new though is an Ethernet based tuner, and one that comes with not just one, but two built in tuners and supports streaming up to 1080i. This little marvel is called the HDHomeRun from SiliconDust.

516 519 518

What you do is connect the HDHomeRun to your home network via the supplied Ethernet cable and then connect an aerial source into one or both of the tuners (if you want use more than one tuner, and why wouldn’t you, you may need to buy an aerial splitter). Once it is all configured you can use any computer on your home network to view, and even record live TV.

HDHomeRun Networked Digital TV Tuner Specifications

One Box, Two Digital Tuners, Anywhere on Your Network

Watch TV from any computer on your network.
Record full 1080i broadcast resolution.
Pause, rewind, fast-forward live TV.
Schedule and record all your favourite TV shows.
Expand with multiple HDHomeRun devices.

TV sources

For use in Europe, Australia, and New Zealand:

DVB-T over-the-air digital TV.
Unencrypted digital cable.

For United States and Canada click here

Works with popular DVR software:

Pause, rewind, fast-forward live TV.
Record all your favorite TV shows by name.
Integrated TV guide (provided by the DVR software).

Seamless operation with multiple computers:

Run Vista or Windows 7 Media Center on multiple computers sharing the pool of HDHomeRun tuners.
Tuners are automatically allocated between computers as needed.
Multiple HDHomeRun units can be used together to expand the number of tuners.
Tuner pooling works with Windows Media Center, GBPVR, MediaPortal, and TotalMedia.

Compatible With:

Windows Media Center:

MCE 2005 (32/64-bit)
Vista WMC (32/64-bit)
WMC TV Pack (32/64-bit)
Windows 7 (32/64-bit)

MediaPortal – DVR for Windows
GB-PVR – DVR for Windows
VLC – Multi-platform media viewer

DVB-T (QAM64/16/QPSK)
DVB-C (QAM256/128/64 Annex A/C)
8/7/6 MHz channel bandwidth (multi-country operation).
IR Receiver (signal PC with a standard remote control)
100baseTX high speed network
1 year warranty

Requirements:

2.8 GHz Pentium 4 (or similar) for HD playback
512 MB RAM (1 GB recommended)
1-2 GB per 1/2 hour of DTV recording

What’s inside the box?

The box comes very neatly packaged and includes the HDHomeRun unit itself, a power supply, a software CD, an Ethernet cable and two aerial cables.

522 524

The HDHomeRun itself is tiny – in fact it is smaller than a video tape (for those of you who are not old enough to remember video tapes, they were big things that were around before DVDs).

There are only four connections on the back of the unit – a power connector, an Ethernet port and the two tuner connectors.

525 526 527

There is no on or off switch, if the device has power then there a green light showing at the front.

Plugging the device in took less than a minute – so nice and easy there.

Installing the HDHomeRun Software

There is an installation CD that comes in the box but I would suggest you skip it and just go download the latest version of the software from the HDHomeRun website. This will not only give you the latest version of the software, but also the latest version of the firmware for the unit.

Installation was very simple and only took a few minutes.

Setup Screen 1 Setup Screen 2 Setup Screen 3 Setup Screen 4

The first time the software launched it found the device and because I was using an updated version of the software, it automatically upgraded the firmware on the device. This was a nice touch and means that you won’t forget to do it or have additional steps and downloads.

Upgrading firmware Upgrading firmware - rebooting

Once the unit had rebooted I was asked to choose my Country and enter my Zip/Postal Code, which I did.

Configuration 1

The next step is to select the source for each tuner and which application you want to use. In my case I only connected one aerial point and chose Digital Antenna and Windows Media Center for my playback.

Configuration 2

The next thing I had to do was run a scan to find all the available channels.

Configuration 3

This doesn’t actually take that long and you can watch the progress.

Scanning

When this is complete you can see the list of available channels – from here you can also disable any channels you don’t want.

Scan completed

If you want to check the channel, you can click the view button which opens Windows Media Player and allows you watch it. You can even just use this to watch TV if you don’t have Media Center installed.

Viewing a channel

There is another program installed with the HDHomeRun software which enables you to configure the device, check the signal strength and update the firmware if required.

HDHomeRun Config screen Upgrade

Using Windows Media Center

So I decided that I wanted to use Windows Media Center to watch and record live TV using the HDHomeRun.

Set up was again very simple, I just followed the wizard in Media Center to add and configure a TV tuner.

Tuner detected Configuring WMC WMC Scanning for channels WMC Scan Completed WMC Tuner Setup Complete

Conclusion

I have to say that I really like the HDHomeRun, its very small, easy to set up and the quality is fantastic. Because the device needs to be connected to your network you can pretty much connect it anywhere, as long as there is an aerial point.

And now with Windows Home Server Power Pack 3 adding the ability to automatically move your recorded content onto your Home Server for you, having an easy to use tuner, or tuners is a winning combination.

The HDHomeRun costs around £160 in the UK and can be ordered from various sources online.

And a big thank you to Nectar for supplying a review unit of the HDHomeRun.

The Home Server Show Podcast – Show 50

HomeServerShow graphic

Dave over at the HomeServerShow.com has released the latest edition of his podcast, The Home Server Show, number 50.

This weeks show they mostly cover Windows Home Server Power Pack 3, plus all the usual news and good stuff.

And yes, that is me talking about Power Pack 3 on the show – I’ve really got around this week 🙂

You can get more information here, and download it from iTunes or your other favourite place.

The Media Center Show #216 – MCEZone and Windows Home Server Power Pack 3

albumcoversmall

Ian Dixon over at the Digital Lifestyle.com has just released the latest Media Center Show, which includes information on Window Home Server PP3, including a quick chat with me on what PP3 brings to the party for Windows Home Server.

Have a listen by clicking here.

Adding a new PC using ‘control userpasswords2’ to Windows Home Server on a Friday Night

I just got my mother a new Dell laptop from Best Buy and I am going to connect it to her Windows Home Server. This usually is not a task worth mentioning but the Geek Squad at Best Buy opens the PCs they sell before you get them. You would think it was nice of them to “check” the new PC for you, but the Geek Squad, bless their little capitalist hearts, load it with cheapie virus protection software and other useless trial applications. In this article I will explain how to work around what those Geeks screwed up.

Background

My parents have two Dell laptops and a HP MSS EX470 and it is time for an upgrade to one of their old laptops. I usually order directly from Dell but our local Best Buy had the same model and as-built specs for the same price. Same price, right? Why not get it today?

While they were picking up the laptop I connected via Remote and added a new User account so she could run both laptops concurrently until she was comfortable retiring the old one. The new laptop has Vista Premium and I want mom to transition from XP Home so she can use Windows Media Center. Viva WHS!

My parents picked up the laptop and had the opened box waiting for me when I arrived and planned on spending just FIVE minutes to connect it to their server. Opened box?

Mental note: Best Buy may have a FIVE minute pick up guarantee but to undo their software crap takes a hour!

What I did not know at the time of purchase was that Best Buy was going to open the box and load a bunch of crap on it. In addition, they were going to give it a name "OWNER-PC" that Mom, and her WHS, did not recognize.

The already opened, now taped up, box is waiting on their kitchen counter which has a label over the tape that say something like "Thank you for shopping at Best Buy. A Geek Squad technician has made changes to your new computer because Corporate can probably trick the average consumer into accepting crappy software that even Dell (believe it or not) would not ship with this computer."

I am not sure if that was exactly what it said, but I think it was close. Lets set this pig on fire!

Equipment Needed

PC with WHS password or user name errors (Available at your local Best Buy)

One Beer (Optional as always)

Windows Home Server Connector CD

Connector Installation

I start the laptop and it boots right to the desktop. This is not good since not seeing a Vista set up screen is the first sign that I am going to have to change settings. Your first thought is to navigate to System Properties and change the name of the PC or even to change the default User Account prior to running the CD. For the purpose of this article I am going to follow that process. I make the changes to her PC and change the names to Mom.

System Properties

I connect to their wireless network and insert the WHS Connector CD. After the installation my cell phone starts texting me with all of the alerts on their WHS. I am getting alerts for no backup and out of date virus protection. I will fix that. Stop texting!

I can open the WHS Console but as you can see below the Name of the new PC is "OWNER-PC". I want the name to be MOM. It is my preference to keep the PC names and User Accounts in sync. You may have other preferences or not be as strange as I am. Viva WHS for letting us be individuals!

WHS Console

Right after I close the Console I get a balloon that a new Connector Upgrade is Available. I am prepared for this since the WHS Connector CD is the original once from a few years ago.

Desktop

Before I start the upgrade process I need to fix the name. Since I already created a User Account for "MOM" I need to make the changes to this PC. But I already changed them in User Accounts and System Properties.

Get to a CMD line or type ‘control userpasswords2’ in the Run box.

Command Exe

This is the actual User Accounts box where you can change account names AND passwords that do not match. Have you been getting those annoying password match errors? This is where you fix it! Forget the standard interface. This one is the way to go if you need advanced controls.

Click on Properties.

User Accounts

Even though I had changed the name to Mom before I need to change it here to really get the names synchronized. Change the User name to the correct name.

Owner Properties

See how the User Name is now "MOM"? This PC is now in sync with WHS!

User Accounts

While I am making these changes the virus protection has updated and WHS is Yellow now. In addition I have spared you the details of removing the other applications, toolbars and icons. If you would like more information on those applications see you local BB.

WHS Console Alert

I click on Yellow and my only remaining Risk issue is updating the Connector. I click on the link to start the process.

Home Network Health

Once you click on the link a browser window will open. Click on "Download Now" to start the upgrade.

WHS Connector Troubleshooter

The standard File Download box appears. Click on Run.

File Download

When the exe. file opens click on Run.

Security Warning

I am on wireless so the download takes about a minute. You mileage will vary.

WHS Connector Setup

Once it downloads it sees the old connector and asks to replace it. Click on Yes.

WHS Connector Alert

Once the new connector is installed it will guide you through the connection process. Click on Next.

WHS Connector

Watch the pretty green bar. Consider opening a second beer.

WHS In Progress

The connector will ask you for your WHS password. This is NOT the PC password unless you made it the same.

WHS Password

This part of the setup is to verify the backup settings. You can always change this later. Click on Yes.

WHS Wakeup Settings

Wait for the pretty green check boxes and click on Next.

WHS Connector

You are now done with the connector upgrade. Click on Finish.

WHS Connector Complete

WHS is now Green and I am good to go. Seriously. My wife wants to go home so we are done here.

WHS is Healthy Again!

I will start the first backup before I leave (so I never have to repeat this again) and mom is all set!

Conclusion

Overall the installation was easy since I was expecting to make User Account changes. The main scope of this article was to show you the ‘control userpasswords2’ dialog box so you can easily make changes to User Accounts. This access route is good for when you add a used computer to your network or have password match errors.

See you next Friday night,

Timothy Daleo

Things to know about the Windows Home Server Power Pack 3 Beta

So the Windows Home Server Power Pack 3 Beta has been publicly available now for a few days, and we have been seeing queries on the PP3 forum and also to us here at the site and so I thought I would throw up a quick post with some things to know and be aware of with PP3 to hopefully save people some time and pain!

  1. Read the documentation that comes with the beta! I know that most of us don’t bother to read documentation, but in this case you really should as the process for installation is different that usual and there are some important notes (which I will cover here as well!)
  2. You install the PP3 beta by running the Install.cmd file and not the pp3 exe.
  3. The console will still claim to be Power Pack 2 – this is expected.
  4. All of the version numbers should say 2061 EXCEPT Drive Extender which should still say 2030.
  5. There are problems installing the Windows Media Center Connector on machines running Windows 7 that are later than the 7100 RC build.
  6. On Windows Vista, both the tv archive and the console view appear on the Windows Media Center “main menu” under Home Server where as on Windows 7 RC only tv archive appears there, console view is under Extras.
  7. Windows Vista-2009-07-18-16-04-26
  8. If you experience what you think is a bug, please log the bug on Microsoft Connect. The whole point of the public beta is to get as much feedback as possible and to correct everything as quickly as possible – that only works if you do your part 🙂
  9. Windows 7 backups – the blog post Microsoft put out seems to have confused some people. There isn’t a new Windows 7 backup feature in PP3, what is there is integration with the Windows 7 Action Center to stop Windows 7 from telling you that there is not backup facility available (when you know there is).

If you find anything else you think worth mentioning, leave a comment.

And enjoy testing Power Pack 3.

Windows Home Server Power Pack 3 Beta Forum Now Online

Now that Windows Home Server Power Pack 3 has been released in beta, you may be wondered where you can go for support or with questions.

Well, the official Windows Home Server forums now has a Power Pack 3 forum – so check it out by clicking here.

Capture

Microsoft Announce Windows Home Server Power Pack 3 Beta

The Windows Home Server team at Microsoft have just posted the following information on their blog:

We are pleased to announce the Windows Home Server Power Pack 3 Beta which improves the Windows Home Server experience with Windows 7 and Windows Media Center by providing the following new features: Backup and restore of computers running Windows 7, Windows 7 Libraries integration, enhancements for Windows Media Center, and better support for netbook computers.

If you are running Windows 7 on your home computer and are a current Windows Home Server user, we need your help!

Important: You will need to sign up as a beta participant of the Windows Home Server program on Microsoft Connect in order to download the Power Pack 3 Beta. https://connect.microsoft.com/WindowsHomeServer

New in Power Pack 3 Beta

Windows 7 Backup & Recovery

Windows Home Server performs a full image-based backup of Windows 7-based computers, allowing for a complete computer recovery in the case of a hard drive failure, or restoration of a single file or folder in the event of accidental deletion or loss. After the Windows Home Server Connector software has been installed on a computer running Windows 7, Windows 7 Backup warnings will be suppressed and users will no longer receive a notification to back up their computer. Windows Home Server can back up Windows XP SP2 or later, Windows Vista and Windows 7-based computers.

Windows 7 Libraries

Power Pack 3 Beta will add Music, Photos and Videos shared folders on the home server to Windows 7 Libraries making the content available for applications such as Windows Explorer, Windows Media Center, Windows Media Player and other applications that use Windows 7 Libraries. This allows users to quickly access all their content in one organized place that is always available, searchable and expandable. Users can also search a specific library without having to know where the files are stored.

Windows Search

Windows Search 4 has been included with Power Pack 3 Beta to improve query search times, indexing times and reliability. If users are searching across multiple computers, extended remote discovery increases the efficiency of searching across all document libraries. Files encrypted with Encrypting File System (EFS) are now supported with search.

The image below is an example of searching across a music library where files are located in multiple places: the home computer Music folder, the home computer Public Music folder, and the home server Music shared folder. Users can add other locations to Windows 7 Libraries.

Power Pack 3 Beta makes Windows Home Server compatible with netbook computers that have small screen sizes and low resolution. A home server makes a great storage and backup solution for ultra-portable computers.

Windows Media Center Enhancements

Last March, Power Pack 2 added functionality that allowed Windows Media Center and Media Center Extenders to easily access the content on a home server. Power Pack 3 Beta builds on this functionality. When the Windows Home Server Connector software is installed or updated on a Windows Media Center computer, the next time a user starts Windows Media Center they will be prompted to install the Windows Media Center Connector. Users will notice a new Home Server selection in Windows Media Center menu.

TV Archiving

The TV Archive tile in Windows Media Center will give users the option to move recorded TV content to the home server in a variety of resolutions. The recorded TV shows are archived in the correct resolution for the type of device that will be used for playback. TV Archive is optimized for Windows Media Center computers, Windows Mobile-based phones, and the Zune player, however, any device capable of playing WMV files can take advantage of this feature.

· TV – Original Resolution

· Windows Mobile – 320 x 240, 500 Kbps, .WMV

· Zune – 640 x 480, 1500 Kbps, .WMV

Users can select individual TV shows, a series of shows, or all TV recordings to automatically be moved to the home server. Because Windows Home Server storage space can be easily expanded, users can keep all the TV shows that they want in their collection.

Console Quick View

Console Quick View allows users to see statistics about the home server through Windows Media Center and Windows Media Center Extenders. This is a convenient way to view many aspects of the home server without needing to access the Windows Home Server Console. This feature allows users to view and monitor a number of home server indicators:

· Storage – Pie chart listing the percentage allocation of the home server storage

· Drives – List, size and health of hard drives installed on the home server

· Backup – List of computers being backed up and their current backup status

· Shared Folders – List of Shared Folders by name with health status and duplication status

· Media Counters – Count of music, photos, videos and recorded TV files on the home server

· Health – Health of the entire home network

· Home Server – System information of the home server’s hardware and manufacturer info

Timing of the Power Pack 3 final release has not been determined. With your help to test the Beta, we hope to release the update prior to the Windows 7 General Availability date of October 22.  Power Pack 3 will be a free update to existing Windows Home Server users via Windows Update. Thanks for your support!

So, there you have it. Power Pack 3 is here in beta form, and if you are interested in testing it sign up on Connect right now. As always, this is a beta so be aware that it is not a finished product, there could be problems and you could lose data – so backup anything you cant afford to lose.

And post a comment to say how you are getting on…..

The Home Server Show – 49 Avast and Antivirus software on your Windows Home Server

HomeServerShow graphic Dave over at the HomeServerShow.com has released the latest edition of his podcast, The Home Server Show, number 49.

This weeks show they mostly cover antivirus and Avast, plus all the usual news and good stuff.

And thanks for the plug in the show notes about Tim’s mControl articles.

You can get more information here, and download it from iTunes or your other favourite place.

Pre-order Windows 7 in the UK for huge discounts

From now until the allocation runs out (or August 9th), here in the UK you can order Windows 7 with huge 50% discount, and in some cases even more than 50%!

Windows 7 will be released to the public on October 22 2009 so this is a great opportunity for you to order it now and save a lot of money.

Win 7 HP E Win 7 Pro E

To order the Windows 7, just click on the relevant link below (or on the relevant box above).

Windows 7 Professional

Windows 7 Home Premium

Remember, this offer is only available until the pre-allocation has gone (of August 9th) so be quick as this is a really good deal!