Here is our review of the Fanttik F2 Pro Cordless Rotary Tool.
Take on cutting, grinding, polishing and engraving jobs without being tied to a plug socket. The F2 Pro pairs a high-efficiency magnetic motor with five speed settings from 5,000 to 25,000 RPM, so it is ready for everything from delicate detail work to heavier DIY tasks around the home.
Power comes from a 3,000mAh battery that delivers between 20 and 120 minutes of runtime depending on the job, and it tops up over USB-C. A rear indicator turns red once the charge drops below 30%, so you are not caught out halfway through a project.
Everything stays organised thanks to the RevoStor Hub, a 360° rotating magnetic holder that keeps all 55 accessories sorted and within easy reach. It all lives inside an aluminium pop-up case that is tough enough for the workshop and neat enough for the craft table.
Features
- Five adjustable speeds from 5,000 to 25,000 RPM.
- High-efficiency magnetic motor.
- 3,000mAh battery with 20–120 minutes of runtime.
- USB-C charging.
- 1/8″ collet.
- Pressure-sensitive speed button that is dustproof, waterproof and easy to clean.
- Shadow-free front LED light and side LED band showing the current speed.
- Rear power indicator that turns red below 30% battery.
- Sleep mode after 15 seconds of inactivity.
- RevoStor Hub 360° rotating magnetic accessory holder.
- 55 accessories for cutting, grinding, polishing, engraving, rust removal and sharpening.
- Aluminium pop-up storage case.
What’s in the box?
Inside the box you will find the F2 Pro rotary tool, the RevoStor Hub loaded with 55 accessories and the aluminium pop-up case that holds it all together. The accessories cover cutting plastic, wood and soft metals (as well as polishing, engraving, rust removal and blade sharpening), so there is plenty to get started with straight away.
Final Thoughts
The Fanttik F2 Pro is a really well thought out rotary tool and it feels more premium than most cordless options at this price.
The aluminium case is a real highlight. It pops open to reveal the RevoStor Hub and the accessories are held in place magnetically, so they don’t end up rattling around the bottom of the case.
Changing speeds is really simple and quick. You press the button to step through the five settings and the LED band on the side shows which one you are on at a glance.
The range of 5,000 to 25,000 RPM covers most hobby and DIY jobs. The lower speeds work really well for polishing and engraving, while the top end gets through cutting and grinding without much fuss.
The front LED light is a nice touch when working on small details and it helps keep shadows off the area you are working on. The tool also goes to sleep after 15 seconds of inactivity, which helps save battery between jobs.
Battery life will vary depending on how hard you push it, with Fanttik quoting anywhere from 20 to 120 minutes. Don’t worry, if the battery does run low the rear indicator turns red below 30% and it charges over USB-C, so a phone charger will do in a pinch.
The only thing to note is the six-month warranty, which is shorter than we would like – although Fanttik does promise lifetime technical support.
The Fanttik F2 Pro Cordless Rotary Tool is priced around £109.99 and comes with its aluminium pop-up case and 55 accessories. If you are after a cordless rotary tool for DIY, crafts or detail work, definitely take a look at it.
