Since becoming a part of the BYOB podcast I have really come to appreciate the Intel Core i7 processor. I needed a new build for garage but wanted to integrate into my existing space. I also wanted to create a build that showcases the Core i7 and use Corsair components where possible. Check out how I created the first-ever undercounter Corsair 700D Core i7.
.
The BYOB Podcast #18
This build is also discussed in detail on The BYOB Podcast #18. Check out BYOB at:
http://homeservershow.com/byob-episode-18.html
.
Saturday Afternoon
2:35 PM – Component Installation Start
.
2:36 PM – Time to mount and install the Corsair TX650W PSU.
.
2:48 PM – Figure our where most of the wiring will go. PSU is really far from mobo. The cables were barely long enough.
.
2:59 PM – Installing mount for Corsair H70 Cooler.
.
3:02 PM – Prepare case for mobo installation. This case has plenty of space and grommets.
.
3:03 PM – Mount Mobo, connect cables and install RAM. This is about the time where I had to find directions online since my B-Stock mobo did NOT come with a manual for the front case wiring. Ugh.
.
Exclellent pictures and step by step discussion. Very nice build.
2 questions –
Can you now do any maintenance through the glass panel or would you have to unmount the case?
Als0 –
Why did you install 2 ethernet cables? I Have an X58 board also but how or why would I use 2 internet connections.
Thanks.
I can get to the case when I remove the plastic grommet and glass. It just acts like a see-through lid.
Dual ports can allow for load balancing or teaming on your internal network.
Here is a quick link for some Intel dual gigabit information:
http://developer.intel.com/design/network/product…